- Parktools say when servicing a freehub body, you should flush it in solvent. Would methylated spirits be suitable for this, or should I use something else?
- Parktools also say to use a liquid lubricant on both sides of the freehub body. Do I use chain oil or something similar, or would bike grease be OK for this?
- Is there a method to determine if my rear hub is the cup-and-cone or cartridge-bearing type (without actually removing it, that is)? I'm hoping it's the latter . If the former, it looks like I'll need to get a pencil magnet, or similar tool.
* I believe it's also termed the freewheel body? I don't know which is the generally-accepted term, though.