The Duckmeister wrote:I've had a couple of occasions where the bolt that adjusts the inner pad has stripped its thread. When you pull hard on the lever, the pressure from the "active" pad pushes the inner one back into the caliper. And yes, a new caliper will fix it; you don't need to replace the lever or rotor. And yeah, it should only be about $30 labour plus the brake.
fooch wrote:I may be a bit late, but I have some Shimano cable disks that are spare that you can have cheap.... I went to hydro's
mb27 wrote:On the steep work carpark ramp, previously I'd have to use the front and rear brake to stop, now just the front brake is ample.
Still need to fit the rear brake....
Users browsing this forum: No registered users and 1 guest