fattima wrote:I just put a 9 speed HG 50 cassette on a 105 hub and there is a bit of play in the cassette. I've got it all done up tight but if I push the largest cog on the cassette I can rock it back and forth. I didn't use a spacer as I didn't think it needed one and none were supplied with the cassette, does anyone know if it does need a spacer, any other ideas. Freehub does not appear loose.
fattima wrote:I remember backing up programs I had written on cassette.
Back on track... Took the cassette of and everything was OK, put it back on and there is still some play. I'll check the hub out.
fattima wrote:deanderwent wrote:
Users browsing this forum: No registered users and 1 guest